Category: Drying equipment
Introduction: OverviewSZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with similar domestic product technology. The double cone vacuum adopts a belt chain elastic connection method, so the equipment runs smooth…

双锥回转真空干燥机
双锥回转真空干燥机
双锥回转真空干燥机
SZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with similar domestic product technology. The double cone vacuum adopts a belt chain elastic connection method, so the equipment runs smoothly. The specially designed process fully reflects the good concentricity of the two shafts, and reliable mechanical seals or rotary joints are used for the heating medium and vacuum system. On this basis, we developed SZG-A, which can perform both stepless speed regulation and constant temperature control.
As a professional drying equipment manufacturer, our products range from high-temperature heat transfer oil as the heat medium, medium temperature steam, and low-temperature hot water. When drying sticky materials, our factory will specially design a "board copying" mechanism or set up rolling balls in the tank for you.
| Name/Specification | 100 | 350 | 500 | 750 | 1000 |
| Tank volume | 100 | 350 | 500 | 750 | 1000 |
| Loading volume (L) | ≤50 | ≤175 | ≤250 | ≤375 | ≤500 |
| Heating area (m2) | 1.16 | 2 | 2.63 | 3.5 | 4.61 |
| Speed (rpm) | 4 - 6 | ||||
| Motor power (kW) | 0.75 | 1.1 | 1.5 | 2 | 3 |
| Long footprint × Width (mm) | 2160×800 | 2260×800 | 2350×800 | 2560×1000 | 2860×1300 |
| Rotation height (mm) | 1750 | 2100 | 2250 | 2490 | 2800 |
|
Design pressure inside the tank (Mpa) |
-0.1-0.15 | ||||
| Jacket design pressure (Mpa) | ≤0.3 | ||||
| Working temperature (℃) | Inside the tank ≤ 85 jacket ≤ 140 | ||||
|
When using the condenser, the vacuum pump |
2X-15A | 2X-15A | 2X-30A | 2X-30A | 2X-70A |
| Model, power | 2KW | 2KW | 3KW | 3KW | 505KW |
|
When the condenser is not used, the vacuum pump |
SK-0.4 | SK-0.8 | SK-0.8 | SK-2.7B | SK-2.7B |
| Model, power | 1.5KW | 2.2KW | 2.2KW | 4KW | 4KW |
| Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 |
| Name/Specification | 1500 | 2000 | 3500 | 4500 | 5000 |
| Tank volume | 1500 | 2000 | 3500 | 4500 | 5000 |
| Loading volume (L) | ≤750 | ≤1000 | ≤1750 | ≤2250 | ≤2500 |
| Heating area (m2) | 5.58 | 7.5 | 11.2 | 13.1 | 14.1 |
| Speed (rpm) | 4 - 6 | ||||
| Motor power (kW) | 3 | 4 | 5.5 | 7.5 | 11 |
| Long footprint × Width (mm) | 3060×1300 | 3260×1400 | 3760×1800 | 3960×2000 | 4400×2500 |
| Rotation height (mm) | 2940 | 2990 | 3490 | 4100 | 4200 |
|
Design pressure inside the tank (Mpa) |
-0.1-0.15 | ||||
| Jacket design pressure (Mpa) | ≤0.3 | ||||
| Working temperature (℃) | -0.1-0.15 | ||||
|
When using the condenser, the vacuum pump |
JZJX300-8 | JZJX300-4 | JZJX600-8 | JZJX600-4 | JZJX300-4 |
| Model, power | 7KW | 9.5KW | 11KW | 20.5KW | 22KW |
|
When the condenser is not used, the vacuum pump |
SK-3 | SK-6 | SK-6 | SK-9 | SK-10 |
| Model, power | 5.5KW | 11KW | 11KW | 15KW | 18.5KW |
| Weight (kg) | 3300 | 3600 | 6400 | 7500 | 8600 |
Note: For materials with significant volume changes before and after drying, the loading coefficient can be appropriately increased or reduced.
Related Products
FZG square static vacuum dryer
Working principleThe so-called vacuum drying refers to heating and drying dry materials under vacuum conditions. If a vacuum pump is used for air extraction and dehumidification, the drying speed is accelerated.Note: If a condenser is used, the solven…
YZG circular static vacuum dryer
Working principleThe so-called vacuum drying refers to heating and drying dry materials under vacuum conditions. If a vacuum pump is used for air extraction and dehumidification, the drying speed is accelerated.Note: If a condenser is used, the solven…
GZQ series vibrating fluidized bed dryer
Working principleThe material enters the machine from the feed inlet, and under the action of vibration, it is thrown along the horizontal fluidized bed and continuously moves forward. After the hot air passes through the fluidized bed and exchanges h…
LPG series high-speed centrifugal spray dryer
Product IntroductionSpray drying is widely used in liquid forming and drying industries. It is especially suitable for generating powdery and granular solid products from solution, lotion, suspension and paste liquid raw materials. Therefore, when the…
YPG series pressure spray (cooling) dryer
Product IntroductionThis unit is a device that can simultaneously complete drying and granulation. According to the process requirements, the pressure, flow rate, and nozzle size of the material liquid pump can be adjusted to obtain the required spher…
ZLPG series Chinese medicine extract spray dryer
Product IntroductionThe machine adopts a fully enclosed form, with all components made of stainless steel and equipped with a three-level purification device. The filtered air meets the requirement of 100000 levels. The cylinder and top are equipped w…
DZLG Series Single-Cone Screw-Belt Vacuum Dryer
Product OverviewThe single-cone vacuum dryer is a stirred, closed-type vacuum dryer. It consists of a single-cone vacuum tank heated by a jacket, in which a stirrer continuously agitates the material to ensure uniform heating, allowing moisture or sol…

Phone


Add
Take a screenshot and recognize the QR code
微信二维码: Star Drying
(点击复制Star DryingOfficial website abbreviation)
Take a screenshot and recognize the QR code
淘宝: Star Drying
(点击复制Star DryingOfficial website abbreviation)